<center id="6vaya"></center>

  • <video id="6vaya"></video>
  • <input id="6vaya"></input>

      <acronym id="6vaya"></acronym>

        不銹鋼制管機 不銹鋼焊管機

        產品實拍圖:?產品詳情1、不銹鋼裝飾管制管機?不銹鋼裝飾管制管機主要用于裝飾、制品、家電用等不銹鋼管及碳鋼管的生產,本系列機組模具成型后生產的產品有圓管、方管、矩形管,也可以生產橢圓管、半圓管、梅花管等各種異形管。如:不銹鋼樓梯扶手、防盜門窗、電熱管、房屋漏水管等。?2、自動化生產流程:?經開卷、進料導向、打標、成型、焊接、外焊縫打磨、整形定徑、定尺、切斷(

        產品實拍圖:


        undefined



         


        產品詳情

        1. Stainless steel decorative pipe control machine

        Stainless steel decorative pipe machine is mainly used for the production of stainless steel pipes and carbon steel pipes for decoration, products and household appliances. After the moulding of this series of units, round pipes, square pipes and rectangular pipes can be drawn out. It can also produce elliptical pipes, semi-circular pipes, plum blossom pipes and other special-shaped pipes. Such as: stainless steel staircase handrails, burglar proof doors and windows, electric heating pipes, etc.

        2, automated production process:

        Through the continuous forming process of uncoiling, feeding guidance, marking, forming, welding, external weld grinding, shaping and sizing, sizing, cutting (coil), jointing, etc., the structure is fine and the operation is simple.

        3. Product characteristics: the machine is strong, durable, high precision, fully automated, simple to operate, continuous production, high efficiency, less waste of materials, high yield, low production cost.

        4, technical parameters:

        Model

        (mm)

        (mm)

        (mm) 

        (mm) 

        Motor power

        Assembly sizeL*W(m) 

        Specification for decorative pipe control machine

        met-30

         30

         20

        Φ5-Φ25

         0.25-0.8

         5.5KW

         19.5*1.0m

        met-S40

         40

         25

        Φ6-Φ40

         0.25-1.2

         5.5KW

         20*1.0m

        met-40

         40

         25

        Φ9.5-Φ50.8

         0.25-2.0

         7.5KW

         21.5*1.1m

        met-40L

         40

         25

        Φ12.7-Φ63.5

         0.25-2.0

         11KW

         21.5*1.1m

        met-50 

         50

         30

        Φ25.4-Φ76.2

         0.4-2.5

         15KW

         24*1.2m

        met-60

         60

         40

        Φ50.8-Φ114

         0.7-3.0

         18.5KW

         26*1.4m

        met-80

         80

         50

        Φ76-Φ168

         1.0-4.0

         36.5KW

         32*2.3m

        met-100

         100

         70

        Φ114-Φ219

         1.5-4.5

         45KW

         36*2.5m

        Operational considerations:

        1, ensure smooth production and meet product requirements.

        1.2 effective maintenance of equipment.

        1.3, write reasonable operation instruction procedures to ensure the production plan and product quality achieve the desired goals.


        2, scope of use:

        Workshop management department.


        3, rules:

        3.1 ensure the effective cleaning of equipment and record of cleanliness during shift.

        3.2 accurately control the operation of the machine before shift and coordinate with normal production. Pay attention to the opening of water, gas or electricity, grinding the wheel, saw blade and cutting table.


        4, boot:

        4 before starting, according to the lubrication requirements, injecting different lubricants to the parts where the lubricating oil is required to be injected.

        4.1 first check whether the electrical switches are in the 0 position, then turn on the power supply.

        4.2 Check whether the mechanical parts and pneumatic system are normal or not. If there are abnormal phenomena, they should be checked and eliminated in time so as not to cause mechanical equipment accidents.

        4.3 Check the transmission gear is correct, otherwise there will be quality problems, whether the pressure gauge of the cutting machine reaches 0.5-0.7 mpa, otherwise it can not be cut.

        4.4 Let the motor run empty for 2-3 minutes before going to work every morning. The transmission gears are equal to 0. When driving, the operator is not allowed to leave the machine tool and do other irrelevant things.

        4.5 it is strictly prohibited to wear gloves to boot, long sleeved clothes must wear hand sleeves, and long hair must wear a hat.

        4.6 do not wipe the rotating parts when starting.

        4.7 correctly adjust the mold, not vigorously under pressure, in place.

        4.8 during the operation, you are not allowed to leave the machine tool. You are not allowed to do other irrelevant things, and pay attention to whether the welds are normal.

        4.9 In the process of pipe-making, the cutting strip must be consented by the workshop director, stored in the belt-laying area, and recorded in detail with the sling operator on the Production Process Card. It must not be discarded at will.

        4.10 If abnormal phenomena are found in operation, such as smoke, burning odor, sudden fuse burning, sudden extinguishment of indicator lights and timely switching off the power switch to be checked out, then turn on operation after troubleshooting.

        4.11 the product's length is checked regularly, not more than 6.01 meters, not less than 6 meters. Strictly controlled between 4mm. The pipe on the unloading pipe rack should not exceed 95% of the total capacity, so that the flat mouth personnel should be lifted in time, otherwise the operator will be responsible for the damage.


        5, downtime:

        5.1 stop welding while closing the power supply.

         

        undefined


        undefined


        undefined


        undefined



        亚洲中文字幕无码永久在线不卡,久久频这里精品99香蕉老司机,亚洲不卡中文字幕无码丶,国自产精品手机在线观看视频